Pro3000 Analog Tone Generator and Probe Tracing Kit | Fluke Networks

Pro3000™ Tone and Probe Series

Pro3000 Series Tone & Probe Kits tone and trace inactive wiring.

Stop the Buzz. Find Cables Faster with Clear, Precise Toning

  • Clear - Innovative filter technology blocks interference (“buzz”) that makes tracing difficult (“F” models only)
  • Precise – SmartTone technology provides five distinct tones for exact pair identification
  • Sends loud tone up to 10 miles (16 kilometers) on most cables
  • Loud speaker on probe makes the tone easier to hear through drywall, wood, and other enclosures
  • Angled bed-of-nails clips allow easy access to individual pairs
  • RJ-11 connector is ideal for use on telephone jacks
  • Attach nylon pouch (included in kit) to your belt for easy transport
Choose the Right Tester!
Talk to an Expert Where to Buy
 

Overview

TELCO Tools Selection Guide



The Pro3000 Tone and Probe Series provides clear and precise tracing of communication cabling. The innovative filtered probe obstructs signal interference present in the environment (caused by power cables and lighting) when listening for tone. The probe’s powerful speaker makes tracing cables through drywall, wood or other enclosures quick and easy.

The Pro3000 toner’s patented SmartTone technology (with five different tones for exact pair identification) allows the technician to identify individual pairs. The tone generator is also capable of sending tone up to 10 miles (16 kilometers) on most cables! The angled-bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks. Attach the nylon pouch to your belt, and you will be equipped for any wire identification job.

 

Features

Pro3000 Capability

Use the SmartTone capability of the Pro3000 Analog Tone Generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification.

 

Tone Generator features:

  • SmartTone technology
  • Send tone signal up to 10 miles on most cables
  • Line cord features angled bed-of-nails clips and ruggedized RJ-11 plug for direct access to phone and data jacks without adapters
  • External switch allows selection of solid or alternating tone options, indi­cated with solid or flashing LEDs
  • Continuity testing
  • Line polarity confirmation
Pro3000 Design

The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. It accommodates a headset (sold separately) for use in noisy environments.

Probe features:

  • Loud large speaker amplifies tone through walls, enclosure, wood or plaster
  • Easy-to-use adjustable volume control dial
  • “Quick-twist” tip for easy replacement
  • Free spare tip inside Pro3000 Tone and Probe Kit

Pro3000F Filtered Probe

Signal Interference from sources in the environment can make tracing cable a frustrating process. The Pro3000F Filter probe “Stops the Buzz” by obstructing these signals allowing you to hear the tone you are tracing loud and clear. The Pro3000F is available in 2 versions:

  • The Pro3000F60 which filters out 60 Hz interference which is the standard frequency in North America
  • The Pro3000F50 which filters out 50 Hz interference which is common in Europe, Asia, and the Pacific.
 

Models & Accessories

 
Models
Model Number/Name Description
26000900
Pro3000 Analog Tone & Probe Kit
26100900
Pro3000 Analog Probe
26200900
Pro3000 Analog Tone Generator
PRO3000F60-KIT
Pro3000F Filtered Probe (60 Hz) and Tone Generator
PRO3000F60
Pro3000F Filtered Probe (60 Hz)
PRO3000F50-KIT
Pro3000F Filtered Probe (50 Hz) and Tone Generator. (Only available internationally and not in the USA)
PRO3000F50
Pro3000F Filtered Probe (50 Hz). (Only available internationally and not in the USA)
 
Accessories
Model Number/Name Description
26100103
Pro3000 Analog Probe replacement tip (two per bag)
 

Specifications

Pro3000 Analog Toner Specifications

User interface

Slide switch selects Continuity or Tone Mode

Push button switch selects SOLID, ALT or OFF

Tone mode LED

Continuity/Polarity LED

Solid Frequency

1000 Hz nominal

Alternating Frequency

1000/1500 Hz nominal

Over Voltage Protection

60 Vdc in Toner/Polarity Mode

Output Power in Tone Mode

8 dbm into 600 ohms

Output Voltage Level in Continuity Mode

8 Vdc with fresh battery

Battery

9V alkaline

Temperature

Operating: -20° C to 60° C, Storage: -40° C to 70° C

Case dimensions

2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)



Pro3000 Analog Probe Specifications

User interface

ON/OFF push button

Volume dial

Replaceable tip

3.5 mm earphone jack

Battery

9V alkaline

Temperature

Operating: -20° C to 60° C, Storage: -40° C to 70° C

Case dimensions

9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm)

 

Documents

 

Data Sheets

Title/Description Download  
Pro3000 Family Data Sheet
Download PDF
Unlock Icon
 

Catalogs

Title/Description Download  
Fluke Networks Solution Catalog
The Guide for selecting and ordering Fluke Network Solutions and Products
Download PDF
5.58 MB
Unlock Icon
Fluke Networks 4 Page Catalog
Download PDF
1012.46 KB
Unlock Icon